Lindeni Forum
question about sample_cve_BDII in MPP_SAMPLE - Printable Version

+- Lindeni Forum (http://forum.lindeni.org)
+-- Forum: Lindenis V5 (http://forum.lindeni.org/forumdisplay.php?fid=5)
+--- Forum: General Discussion on Lindenis V5 (http://forum.lindeni.org/forumdisplay.php?fid=6)
+--- Thread: question about sample_cve_BDII in MPP_SAMPLE (/showthread.php?tid=36)



question about sample_cve_BDII in MPP_SAMPLE - arglues - 11-01-2018

In this sample: sample_cve_BDII, it builds a depth picture from left and right YUV format file. 
While if we want to create yuv files from cmos sensor, that is mpi_ise work as input, we have to calibration both left and right camera to get inner and external parameters. Without these paraameters, the Binocular Vision is actually unvaliable.
Is there any document can be refer to do this?


RE: question about sample_cve_BDII in MPP_SAMPLE - Michael - 11-12-2018

There is no documentation for parameters now.

Refer to this sample to get yuv data form camera.
https://github.com/lindenis-org/mpp_sample/tree/master/sample_virvi

and try about the parameters of stBDIIParam, that may be effective.


RE: question about sample_cve_BDII in MPP_SAMPLE - lucifer1413 - 01-24-2020

I think this is an informative post and it is very useful and knowledgeable. therefore, I would like to thank you for the efforts you have made in writing this article. If you are looking for antivirus security for your PC and any other digital devices than. Visit at my sites :-
www.norton.com/setup  | geek squad tech support