08-12-2019, 05:26 AM
"..have you tried to use our prebuilt image..." yes, it's ok. i see even the desktop via hdmi
yesterday, i rebuild the image again(delete kernel directory and run 'repo sync' console command ). flashed it and got the log below:
....
....
....
[2.272][mmc]: mmc exit start
[2.291][mmc]: mmc 2 exit ok
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.55+ (aa@aa) (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) ) #1 SMP PREEMPT Sun Aug 11 19:43:16 +05 2019
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: sun8iw12
[ 0.000000] cma: Reserved 384 MiB at 0x63c00000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] BUG: not creating mapping for 0x48105000 at 0x38105000 in user region
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0d20440, node_mem_map e0ff9000
[ 0.000000] Normal zone: 1072 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 137216 pages, LIFO batch:31
[ 0.000000] HighMem zone: 124928 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 13 pages/cpu @e0f76000 s22080 r8192 d22976 u53248
[ 0.000000] pcpu-alloc: s22080 r8192 d22976 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 261072
[ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x05000c00 initcall_debug=0 console=ttyS0,115200 loglevel=8 rootwait=1 root=/dev/mmcblk0p1 fsck.repair=yes init=/init partitions=boot-res@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:UDISK@mmcblk0p1 cma=384M vmalloc=480M mac_addr= wifi_mac= mix=0x1000@0x7bd31000 mbr=0x3e0
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 32768 bytes
[ 0.000000] early log buf free: 14608(89%)
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 632948K/1048576K available (7168K kernel code, 1198K rwdata, 2156K rodata, 1024K init, 230K bss, 22412K reserved, 393216K cma-reserved, 106492K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe2000000 - 0xff800000 ( 472 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe1800000 ( 536 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
[ 0.000000] .data : 0xc0c00000 - 0xc0d2bb94 (1199 kB)
[ 0.000000] .bss : 0xc0d2d000 - 0xc0d668d4 ( 231 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000020] Switching to timer-based delay loop, resolution 41ns
[ 0.000154] Console: colour dummy device 80x30
[ 0.000181] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000198] pid_max: default: 32768 minimum: 301
[ 0.000437] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000452] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001254] CPU: Testing write buffer coherency: ok
[ 0.001311] ftrace: allocating 27419 entries in 81 pages
[ 0.044759] CPU0: update cpu_capacity 1024
[ 0.044780] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.044878] Setting up static identity map for 0x40100000 - 0x40100058
[ 0.124686] CPU1: update cpu_capacity 1024
[ 0.124692] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.154701] CPU2: update cpu_capacity 1024
[ 0.154708] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.184749] CPU3: update cpu_capacity 1024
[ 0.184755] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.184824] Brought up 4 CPUs
[ 0.184857] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.184865] CPU: All CPU(s) started in SVC mode.
[ 0.185693] devtmpfs: initialized
[ 0.235643] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.236246] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.236282] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.251474] atomic64_test: passed
[ 0.251504] pinctrl core: initialized pinctrl subsystem
[ 0.253025] NET: Registered protocol family 16
[ 0.254950] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.255664] dump_class_init,855, success
[ 0.258309] sun8iw12p1-r-pinctrl r_pio: initialized sunXi PIO driver
[ 0.262634] sun8iw12p1-pinctrl pio: initialized sunXi PIO driver
[ 0.264595] sunxi hwspinlock vbase:0xf3004000
[ 0.313059] pwm module init!
[ 0.319962] [ARISC]
unxi-arisc driver v1.06
[ 0.321255] msgbox pbase:0x03003000, vbase:0xf3003000, size:0x1000, irq:0xdc, status:1
[ 0.321961] [ARISC] :hwmsgbox initialize
[ 0.324227] [ARISC] :arisc version: [sun8iw5_v0.03.00-399-g9fac845]
[ 0.324253] [ARISC]unxi-arisc driver v1.06 startup succeeded
[ 0.325366] SCSI subsystem initialized
[ 0.325902] usbcore: registered new interface driver usbfs
[ 0.326019] usbcore: registered new interface driver hub
[ 0.326179] usbcore: registered new device driver usb
[ 0.328958] media: Linux media interface: v0.10
[ 0.329072] Linux video capture interface: v2.00
[ 0.330151] Advanced Linux Sound Architecture Driver Initialized.
[ 0.331230] Bluetooth: Core ver 2.21
[ 0.331297] NET: Registered protocol family 31
[ 0.331307] Bluetooth: HCI device and connection manager initialized
[ 0.331327] Bluetooth: HCI socket layer initialized
[ 0.331345] Bluetooth: L2CAP socket layer initialized
[ 0.331396] Bluetooth: SCO socket layer initialized
[ 0.332713] of_property_read_u32_array ac200.tv_used fail
[ 0.333334] [axp233] chip id not detect 0x62 !
[ 0.333438] [axp233] enable dcdc2 dvm.
[ 0.345531] clocksource: Switched to clocksource arch_sys_counter
[ 0.408215] NET: Registered protocol family 2
[ 0.409056] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.409151] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.409267] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.409395] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.409451] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.409786] NET: Registered protocol family 1
[ 0.410218] RPC: Registered named UNIX socket transport module.
[ 0.410229] RPC: Registered udp transport module.
[ 0.410237] RPC: Registered tcp transport module.
[ 0.410244] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.416449] sunxi budget cooling probe start !
[ 0.416484] CPU freq cooling register Success
[ 0.416508] CPU hotplug cooling register Success
[ 0.416900] CPU budget cooling register Success
[ 0.417525] [DISP]disp_module_init
[ 0.417887] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.419618] spi spi1: master is unqueued, this is deprecated
[ 0.420252] [DISP] boot_disp:0x0
[ 0.433543] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.433953] Registering sdcardfs 0.1
[ 0.435332] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.436676] fuse init (API version 7.23)
[ 0.439041] NET: Registered protocol family 38
[ 0.439192] bounce: pool size: 64 pages
[ 0.439511] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.439537] io scheduler noop registered
[ 0.439554] io scheduler deadline registered
[ 0.439632] io scheduler cfq registered (default)
[ 0.455326] rotation_sw module is config as no used
[ 0.455362] [DISP] disp_get_rotation_sw,line:130:
[ 0.455370] disp 0 out of range? g_rot_sw=0
[ 0.455378] [DISP] disp_init_connections,line:385:
[ 0.455384] NULL pointer: 0, 0
[ 0.458298] [DISP] fb_base:0x46400000
[ 0.522382] format0,para:32bpp,a(24,8),r(16,8),g(8,8),b(0,8)
[ 0.525833] [DISP]disp_module_init finish
[ 0.525866] disp_module_init+0x0/0x124 complete comp.
[ 0.526679] np name = /soc@03000000/rtc@07000000
[ 0.526694] base = f7000100, len = 8.
[ 0.526755] pmu1 does not exist.
[ 0.527090] axp_add_sys_pwr_dm: get ldo name for id: vcc-lpddr failed
[ 0.527298] axp_add_sys_pwr_dm: vcc-pc not sys id.
[ 0.527307] after inited: sys_mask config = 0x4a55.
[ 0.527389] Warning: can not find np for dynamic_standby_para.
[ 0.527808] lookup_scene_lock_name: new scene lock super_standby
[ 0.527818] scene_lock_init name=super_standby
[ 0.527829] scene_lock: super_standby, type 5, count 1
[ 0.527837] enter set_extended_standby_manager
[ 0.527848] leave set_extended_standby_manager : id 0x8
[ 0.534138] uart0: ttyS0 at MMIO 0x5000000 (irq = 232, base_baud = 1500000) is a SUNXI
[ 0.534172] sw_console_setup()1271 - console setup baud 115200 parity n bits 8, flow n
[ 1.502477] console [ttyS0] enabled
[ 1.507501] uart1: ttyS1 at MMIO 0x5000400 (irq = 233, base_baud = 1500000) is a SUNXI
[ 1.517507] misc dump reg init
[ 1.522407] G2D: Module initialized.major:247
[ 1.528187] sunxi-wlan wlan: wlan_busnum (1)
[ 1.532959] sunxi-wlan wlan: wlan_usbnum (3)
[ 1.537756] sunxi-wlan wlan: wlan_power_name (vcc33-wifi)
[ 1.543789] sunxi-wlan wlan: io_regulator_name (vcc18-wifi)
[ 1.550069] sunxi-wlan wlan: wlan_regon gpio=356 mul-sel=1 pull=-1 drv_level=-1 data=0
[ 1.559343] sunxi-wlan wlan: get gpio wlan_en failed
[ 1.564902] sunxi-wlan wlan: wlan_hostwake gpio=357 mul-sel=6 pull=-1 drv_level=-1 data=0
[ 1.574463] sunxi-wlan wlan: get gpio wlan_clk_gpio failed
[ 1.580621] sunxi-wlan wlan: enable clk
[ 1.585646] sunxi-bt bt: bt_power_name (vcc18-wifi)
[ 1.591098] sunxi-bt bt: io_regulator_name (vcc-pg)
[ 1.596592] sunxi-bt bt: bt_rst gpio=364 mul-sel=1 pull=-1 drv_level=-1 data=0
[ 1.606078] tun: Universal TUN/TAP device driver, 1.6
[ 1.611720] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.620102] gmac-power1: NULL
[ 1.623417] gmac-power2: NULL
[ 1.628417] PPP generic driver version 2.4.2
[ 1.633528] PPP BSD Compression module registered
[ 1.638819] PPP Deflate Compression module registered
[ 1.644474] PPP MPPE Compression module registered
[ 1.649852] NET: Registered protocol family 24
[ 1.654855] PPTP driver version 0.8.5
[ 1.659406] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.667026] get ehci0-controller, regulator_io is no nocare
[ 1.673380] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xc0d54e9c, 0x:f5101000, irq_no:ee
[ 1.685411] sunxi-ehci 5101000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.695573] sunxi-ehci 5101000.ehci0-controller: new USB bus registered, assigned bus number 1
[ 1.705589] sunxi-ehci 5101000.ehci0-controller: irq 238, io mem 0xc04b1328
[ 1.725561] sunxi-ehci 5101000.ehci0-controller: USB 0.0 started, EHCI 1.00
[ 1.734646] hub 1-0:1.0: USB hub found
[ 1.738901] hub 1-0:1.0: 1 port detected
[ 1.743913] [ehci0-controller]: sunxi_usb_disable_ehci
[ 1.749683] [sunxi-ehci0]: remove, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xc0d54e9c
[ 1.759435] sunxi-ehci 5101000.ehci0-controller: remove, state 1
[ 1.766181] usb usb1: USB disconnect, device number 1
[ 1.773441] sunxi-ehci 5101000.ehci0-controller: USB bus 1 deregistered
[ 1.781152] get ehci1-controller, regulator_io is no nocare
[ 1.787563] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xc0d55040, 0x:f5200000, irq_no:f0
[
... at this moment the device itself is reset and rebooted. the log starts to be displayed from the beginning.
yesterday, i rebuild the image again(delete kernel directory and run 'repo sync' console command ). flashed it and got the log below:
....
....
....
[2.272][mmc]: mmc exit start
[2.291][mmc]: mmc 2 exit ok
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.55+ (aa@aa) (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) ) #1 SMP PREEMPT Sun Aug 11 19:43:16 +05 2019
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: sun8iw12
[ 0.000000] cma: Reserved 384 MiB at 0x63c00000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] BUG: not creating mapping for 0x48105000 at 0x38105000 in user region
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0d20440, node_mem_map e0ff9000
[ 0.000000] Normal zone: 1072 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 137216 pages, LIFO batch:31
[ 0.000000] HighMem zone: 124928 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 13 pages/cpu @e0f76000 s22080 r8192 d22976 u53248
[ 0.000000] pcpu-alloc: s22080 r8192 d22976 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 261072
[ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x05000c00 initcall_debug=0 console=ttyS0,115200 loglevel=8 rootwait=1 root=/dev/mmcblk0p1 fsck.repair=yes init=/init partitions=boot-res@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:UDISK@mmcblk0p1 cma=384M vmalloc=480M mac_addr= wifi_mac= mix=0x1000@0x7bd31000 mbr=0x3e0
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 32768 bytes
[ 0.000000] early log buf free: 14608(89%)
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 632948K/1048576K available (7168K kernel code, 1198K rwdata, 2156K rodata, 1024K init, 230K bss, 22412K reserved, 393216K cma-reserved, 106492K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe2000000 - 0xff800000 ( 472 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe1800000 ( 536 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
[ 0.000000] .data : 0xc0c00000 - 0xc0d2bb94 (1199 kB)
[ 0.000000] .bss : 0xc0d2d000 - 0xc0d668d4 ( 231 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000020] Switching to timer-based delay loop, resolution 41ns
[ 0.000154] Console: colour dummy device 80x30
[ 0.000181] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000198] pid_max: default: 32768 minimum: 301
[ 0.000437] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000452] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001254] CPU: Testing write buffer coherency: ok
[ 0.001311] ftrace: allocating 27419 entries in 81 pages
[ 0.044759] CPU0: update cpu_capacity 1024
[ 0.044780] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.044878] Setting up static identity map for 0x40100000 - 0x40100058
[ 0.124686] CPU1: update cpu_capacity 1024
[ 0.124692] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.154701] CPU2: update cpu_capacity 1024
[ 0.154708] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.184749] CPU3: update cpu_capacity 1024
[ 0.184755] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.184824] Brought up 4 CPUs
[ 0.184857] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.184865] CPU: All CPU(s) started in SVC mode.
[ 0.185693] devtmpfs: initialized
[ 0.235643] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.236246] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.236282] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.251474] atomic64_test: passed
[ 0.251504] pinctrl core: initialized pinctrl subsystem
[ 0.253025] NET: Registered protocol family 16
[ 0.254950] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.255664] dump_class_init,855, success
[ 0.258309] sun8iw12p1-r-pinctrl r_pio: initialized sunXi PIO driver
[ 0.262634] sun8iw12p1-pinctrl pio: initialized sunXi PIO driver
[ 0.264595] sunxi hwspinlock vbase:0xf3004000
[ 0.313059] pwm module init!
[ 0.319962] [ARISC]
unxi-arisc driver v1.06[ 0.321255] msgbox pbase:0x03003000, vbase:0xf3003000, size:0x1000, irq:0xdc, status:1
[ 0.321961] [ARISC] :hwmsgbox initialize
[ 0.324227] [ARISC] :arisc version: [sun8iw5_v0.03.00-399-g9fac845]
[ 0.324253] [ARISC]
unxi-arisc driver v1.06 startup succeeded[ 0.325366] SCSI subsystem initialized
[ 0.325902] usbcore: registered new interface driver usbfs
[ 0.326019] usbcore: registered new interface driver hub
[ 0.326179] usbcore: registered new device driver usb
[ 0.328958] media: Linux media interface: v0.10
[ 0.329072] Linux video capture interface: v2.00
[ 0.330151] Advanced Linux Sound Architecture Driver Initialized.
[ 0.331230] Bluetooth: Core ver 2.21
[ 0.331297] NET: Registered protocol family 31
[ 0.331307] Bluetooth: HCI device and connection manager initialized
[ 0.331327] Bluetooth: HCI socket layer initialized
[ 0.331345] Bluetooth: L2CAP socket layer initialized
[ 0.331396] Bluetooth: SCO socket layer initialized
[ 0.332713] of_property_read_u32_array ac200.tv_used fail
[ 0.333334] [axp233] chip id not detect 0x62 !
[ 0.333438] [axp233] enable dcdc2 dvm.
[ 0.345531] clocksource: Switched to clocksource arch_sys_counter
[ 0.408215] NET: Registered protocol family 2
[ 0.409056] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.409151] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.409267] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.409395] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.409451] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.409786] NET: Registered protocol family 1
[ 0.410218] RPC: Registered named UNIX socket transport module.
[ 0.410229] RPC: Registered udp transport module.
[ 0.410237] RPC: Registered tcp transport module.
[ 0.410244] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.416449] sunxi budget cooling probe start !
[ 0.416484] CPU freq cooling register Success
[ 0.416508] CPU hotplug cooling register Success
[ 0.416900] CPU budget cooling register Success
[ 0.417525] [DISP]disp_module_init
[ 0.417887] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.419618] spi spi1: master is unqueued, this is deprecated
[ 0.420252] [DISP] boot_disp:0x0
[ 0.433543] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.433953] Registering sdcardfs 0.1
[ 0.435332] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.436676] fuse init (API version 7.23)
[ 0.439041] NET: Registered protocol family 38
[ 0.439192] bounce: pool size: 64 pages
[ 0.439511] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.439537] io scheduler noop registered
[ 0.439554] io scheduler deadline registered
[ 0.439632] io scheduler cfq registered (default)
[ 0.455326] rotation_sw module is config as no used
[ 0.455362] [DISP] disp_get_rotation_sw,line:130:
[ 0.455370] disp 0 out of range? g_rot_sw=0
[ 0.455378] [DISP] disp_init_connections,line:385:
[ 0.455384] NULL pointer: 0, 0
[ 0.458298] [DISP] fb_base:0x46400000
[ 0.522382] format0,para:32bpp,a(24,8),r(16,8),g(8,8),b(0,8)
[ 0.525833] [DISP]disp_module_init finish
[ 0.525866] disp_module_init+0x0/0x124 complete comp.
[ 0.526679] np name = /soc@03000000/rtc@07000000
[ 0.526694] base = f7000100, len = 8.
[ 0.526755] pmu1 does not exist.
[ 0.527090] axp_add_sys_pwr_dm: get ldo name for id: vcc-lpddr failed
[ 0.527298] axp_add_sys_pwr_dm: vcc-pc not sys id.
[ 0.527307] after inited: sys_mask config = 0x4a55.
[ 0.527389] Warning: can not find np for dynamic_standby_para.
[ 0.527808] lookup_scene_lock_name: new scene lock super_standby
[ 0.527818] scene_lock_init name=super_standby
[ 0.527829] scene_lock: super_standby, type 5, count 1
[ 0.527837] enter set_extended_standby_manager
[ 0.527848] leave set_extended_standby_manager : id 0x8
[ 0.534138] uart0: ttyS0 at MMIO 0x5000000 (irq = 232, base_baud = 1500000) is a SUNXI
[ 0.534172] sw_console_setup()1271 - console setup baud 115200 parity n bits 8, flow n
[ 1.502477] console [ttyS0] enabled
[ 1.507501] uart1: ttyS1 at MMIO 0x5000400 (irq = 233, base_baud = 1500000) is a SUNXI
[ 1.517507] misc dump reg init
[ 1.522407] G2D: Module initialized.major:247
[ 1.528187] sunxi-wlan wlan: wlan_busnum (1)
[ 1.532959] sunxi-wlan wlan: wlan_usbnum (3)
[ 1.537756] sunxi-wlan wlan: wlan_power_name (vcc33-wifi)
[ 1.543789] sunxi-wlan wlan: io_regulator_name (vcc18-wifi)
[ 1.550069] sunxi-wlan wlan: wlan_regon gpio=356 mul-sel=1 pull=-1 drv_level=-1 data=0
[ 1.559343] sunxi-wlan wlan: get gpio wlan_en failed
[ 1.564902] sunxi-wlan wlan: wlan_hostwake gpio=357 mul-sel=6 pull=-1 drv_level=-1 data=0
[ 1.574463] sunxi-wlan wlan: get gpio wlan_clk_gpio failed
[ 1.580621] sunxi-wlan wlan: enable clk
[ 1.585646] sunxi-bt bt: bt_power_name (vcc18-wifi)
[ 1.591098] sunxi-bt bt: io_regulator_name (vcc-pg)
[ 1.596592] sunxi-bt bt: bt_rst gpio=364 mul-sel=1 pull=-1 drv_level=-1 data=0
[ 1.606078] tun: Universal TUN/TAP device driver, 1.6
[ 1.611720] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.620102] gmac-power1: NULL
[ 1.623417] gmac-power2: NULL
[ 1.628417] PPP generic driver version 2.4.2
[ 1.633528] PPP BSD Compression module registered
[ 1.638819] PPP Deflate Compression module registered
[ 1.644474] PPP MPPE Compression module registered
[ 1.649852] NET: Registered protocol family 24
[ 1.654855] PPTP driver version 0.8.5
[ 1.659406] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.667026] get ehci0-controller, regulator_io is no nocare
[ 1.673380] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xc0d54e9c, 0x:f5101000, irq_no:ee
[ 1.685411] sunxi-ehci 5101000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.695573] sunxi-ehci 5101000.ehci0-controller: new USB bus registered, assigned bus number 1
[ 1.705589] sunxi-ehci 5101000.ehci0-controller: irq 238, io mem 0xc04b1328
[ 1.725561] sunxi-ehci 5101000.ehci0-controller: USB 0.0 started, EHCI 1.00
[ 1.734646] hub 1-0:1.0: USB hub found
[ 1.738901] hub 1-0:1.0: 1 port detected
[ 1.743913] [ehci0-controller]: sunxi_usb_disable_ehci
[ 1.749683] [sunxi-ehci0]: remove, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xc0d54e9c
[ 1.759435] sunxi-ehci 5101000.ehci0-controller: remove, state 1
[ 1.766181] usb usb1: USB disconnect, device number 1
[ 1.773441] sunxi-ehci 5101000.ehci0-controller: USB bus 1 deregistered
[ 1.781152] get ehci1-controller, regulator_io is no nocare
[ 1.787563] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xc0d55040, 0x:f5200000, irq_no:f0
[
... at this moment the device itself is reset and rebooted. the log starts to be displayed from the beginning.